|
Home
Storefront
Browse Sections
|
|
|
|
 |
300 PSI PORTABLE AIR COMPRESSOR - Tire Inflator - 12V
Price : $9.99
Average
Customer Rating : Not
yet rated |
| Editorial Review :
Perfect compressor for those small jobs or emergencies. Plug this into your cigarette lighter and inflate car tires, bike tires, footballs, basketballs, inter-tubes, floats, you name it! Max Pressure: 300 psi Turn on by plugging into your vehicle cigarette lighter (12V power source) Inflator connectors included Equipped with Gauge Long Cord (approximately 12 foot) Brand New
Customer Review :
No review yet |
 |
Rockworth RW1820F 20-Gallon Factory Reconditioned Portable Electric Shop Air Compressor
Price : $199.99 Too low to display
Features
: - Powerful 1.8 HP high output motor includes automatic start/stop operation for easy use
- 155 psi maximum pressure
- 34 inch height stores under workbench
- Oil-free pump means no maintenance
Average
Customer Rating : Not
yet rated |
| Editorial Review :
The Rockworth 20-Gallon Portable Electric Shop Air Compressor features a powerful 1.8 HP motor with automatic start/stop operation that offers easy, safe use. Push-to-connect fitting offers easy, one handed operation, and the oversized controls are easy to read. No accessories included.
Customer Review :
No review yet |
 |
DEWALT D55151 14 Amp 2-1/2-HP 4-Gallon Oiled Twin Hot Dog Compressor
Price : $477.48 $218.00
Features
: - 3.2 CFM delivered at 100 PSI pump enables quick recovery
- Oil lubricated pump improves durability
- Cast iron cylinder enhances pump life
- Lightweight design for easy use and handling in a variety of orientations
- High-flow regulator for increased performance; Dual soft start valves assist in cold weather start-up
Average
Customer Rating : Not
yet rated |
| Editorial Review :
The DEWALT D55151 Hot Dog Compressor has all the power of a large compressor, but constructed as a smaller, lighter unit. It delivers 3.2 cubic feet per minute at 100 psi and is durably built with oil-lubricated cast-iron cylinder. Included with the Hot Dog Compressor are a 2/8 inch regulator and an initial fill of DEWALT synthetic air compressor oil.
Customer Review :
No review yet |
 |
Porter-Cable C2002 Oil-Free UMC Pancake Compressor
Price : $318.78 $143.99
Features
: - 150 psi max tank pressure stores more air in the tank for longer tool run times
- 2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217
- Six-gallon pancake-style tank for stability, includes water drain valve and rubber feet
- Low-amp 120-volt motor starts easily in cold weather or with extension cord
- Durable oil-free pump for long life and no maintenance
Average
Customer Rating : Not
yet rated |
| Editorial Review :
Highly portable and exceptionally easy to use, the Porter-Cable C2002 150-PSI, Six-Gallon Oil-Free Pancake Compressor packs a big punch in a small package. Perfect for everything from filling tires to firing nailers, this compressor features an induction motor that provides long life and optimum performance. For convenience, this efficient unit runs off of normal household circuits and offers mess-free, oil-free operation.  |
The Porter-Cable C2002
Oil-Free Pancake Compressor
At a Glance:- 150 PSI max pressure
- 2.6 SCFM at 90 PSI for fast recovery time
- 6-gallon pancake-style tank
- Durable oil-free pump
- Portable weight of 34 pounds
|
|  |
|
With its oil-free pump and portable size, the compressor is ideal in and around the house. |
Compact, Portable, and Powerful
At just 34 pounds, the C2002 is lightweight and portable enough for jobsite, workshop, or around-the-house use. This means it's a great choice for a range of jobs--everything from installing trim to inflating air mattresses.The C2002 is also powerful and efficient, thanks to its low-amp, 120-volt motor. The motor starts easily in cold weather, comes with an extension cord, and features replaceable brushes. And with 150 PSI max pressure, this motor will give you long runtime and optimum productivity. Complete with built-in automatic thermal overload protection, the C2002 runs at 2.6 SCFM at 90 PSI and 3.7 SCFM at 40 PSI for faster recharge of its six-gallon tank. At the same time, a high-flow air regulator allows more work at a higher pressure, giving you the flexibility to take on a variety of jobs. User-Friendly Design; Maintenance-Free Reliability
Perhaps the C2002's most important feature is its oil-free pump, which ensures you won't have to worry about oil spills or maintenance issues. The pump also extends the life of the tool and makes for clean, efficient operation. Additionally, the C2002's six-gallon pancake-style tank ensures stability and includes a water drain valve and rubber feet that won't scratch or mar wood surfaces. The compressor also features an upgraded shroud, handle, and console cover for optimum protection and portability. For further convenience, two regulated factory-installed air couplers support two users at once. What's in the Box
C2002 pancake compressor and manual.
Customer Review :
No review yet |
 |
Rockworth RW2G110DPNG 2-Gallon Factory Reconditioned Portable Electric Air Compressor
Price : $99.99 Too low to display
Features
: - 110 psi maximum pressure
- Dual output for quick, easy inflation
- Delivers 0.6 SCFM at 90 psi
- Oil-free pump means no maintenance
Average
Customer Rating : Not
yet rated |
| Editorial Review :
The Rockworth 2-Gallon Portable Electric Air Compressor features automatic start/stop operation that offers easy, safe use. Push-to-connect fitting offers easy, one handed operation, and the oversized controls are easy to read. No accessories included.
Customer Review :
No review yet |
More
Results : [First] [Prev] 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 [Next] [Last]
Quick Link : 40 | 60 | 80 | 100 | 120
|
|
Questions & Answers
Question : What value is there in air compressor tank sizes?
If I bought a 2 gallon air compressor or a 200 gallon air compressor, what is the difference, why is it important?I understand that the compressor would have to run more often on a smaller tank, but is this a bad thing?
Answer:
By having the sure volume of air you can operate your tools better, say your blowing out a water sprinkler system, the 2 gallon of air will not do it as theres not enough air to clear the pipes, and the compressor running will not deliver enough volume to do the job, same as an air tool that takes 90 psi to run, having 200 gallons of air will run the tool say 5 min without waiting for more air to run the tool, and the 2 gallon would only turn the tool for say 15-20 seconds before you have to wait for more volume of air to pump up..............
|
Question : What size/power air compressor do you use to blow out lines on inground pool for winterization?
Last year we used a shop vac on blow, but it's not working on the return jet for some reason. We'd like to buy an air compressor for that and just to have around the garage. What size/power or whatever they are measured in is required to blow out the lines for a pool? They are about 20-30 feet long. And how do you create a seal over the pipe to blow them out? When we had someone close the pool 2 years ago, they had the end of the compressor hose go into a rubber cork like thing that they put right into the pipe end. Is that something offfical you can buy, or something they created??
Answer:
A regular portable air compressor will work just fine. You will also be able to use it to keep your tire pressures up to save energy.You didn't say what size the pool pipe is, so go to a hardware store and ask for an electrical CGB. Inside this electrical fitting is a tapered grommet. Buy the one with the O.D. bigger than your pipe, and the I.D. slightly smaller than the diameter of your blow nozzle. Slip the grommet on the blow nozzle, and force the grommet against your pipe.You will want to set the regulator on your compressor to approximately 40 pounds.Good luck!
|
Question : Where do I take an air compressor to get repaired?
I have an air compressor that can't build up any pressure. The pump runs, but the pressure stays near zero. I can't figure out where to take it for repairs. I've called a lawn mower shop, a pump repair shop, and an electrical repair shop. None of them work on air compressors. Any ideas?
Answer:
1 look in owners manual..they have service/repair places listed or # to call2 no book? yahoo/google search the neme brand3 phone book4 unless its a 500+ priced compressor its usually not worth repairing..
|
Question : What kind of air compressor can fill up a average nitrogen tank?
I am thinking about getting a nitrogen tank so I can play during the winter. I have a air compressor but i want to know if it could fill it up.
Answer:
no average compressor will be able to fill a nitrogen tank to the pressure that you will want, the most amount of pressure that you would be able to get is around 150
|
Question : Can I use my air compressor and a spray gun for the following paint jobs?
All interior work:I want to prime and latex paint some walls.I also want to finish oil painting the basement cement floor.The air compressor is an oiless 8 gallon 150 psi electric modelIt easily powers an impact gunhas a regulator knob and two gauges.The primer is the thickest of the liquids which I want to spray.I got a HVLP Spray GunIt has a 2.0 mm tip, All metal construction, and Brass Fan Nozzle with one quart dripless cup. Runs at 20 to 45 psi with 1/4 nps inlet. It has a Air Control, Spray Control, and Fluid Control for making adjustments.Any advice is appreciated.
Answer:
The HVLP is the way to go and I would keep the psi down to 30 or so to control the overspray. I also think that your 8 gallon tank is sufficient. It might work the compressor a little overtime because of the constaint drain of the sprayer, but for a one time deal I think will be fine. I'd do it. Good luck.
|
Question : What size air compressor do you need to paint a car? I want to learn how to paint cars.?
I want to learn how to paint cars, was wondering what size air compressor you need to paint cars? How many gallons and what Hp?
Answer:
you need twenty to thirty gallon tank and pressure regulator on your gun so you can adjust your pressure at the gun not the tank
|
Question : Air compressor?
Is a 7 lb air compressor a good size compressor to have to for small projects around the house? I would use it for trim, blowing up tires, small projects around the house.
Answer:
I have a 6lb air compressor for my garage and use it for small projects. It works great so far. I suppose you can always buy a bigger one no matter which one you buy.I bought mine from this site. The husky one. http://www.safety-devices.com/husky6g.htm
|
Question : How do i stop air compressor from running when it reaches set pressure?
i am building a air compressor powered by diesel engine and i want the pump to stop running or pumping when it reaches the set air pressure but the engine to go down to idle and when the pressure drops the engine goes to full speed and pump starts pumping again what is the name of the parts i have to buy
Answer:
Go to your local hardware store and get a high low pressure switch that is made for that.Tell them what your putting together and they will be able get the one you need.
|
Question : How does this air tank/compressor work?
So I have a 15lb. air tank which has three spiky things that air comes out of or goes into and a pressure gague and a release lever. I need to make it into an air compressor to fire a cannon (theatre thing). I don't have any idea how to power this. There are no plugs or cords or anything! Help, I'm feeling like an idiot.Actually, this is for shooting fake blood across a stage.
Answer:
those tanks are filled at a station that services and rents them, most have heillium for balloons but some are compressed air. they hold a great deal of air. Try a party store for info
|
Question : What size air line to run for my air compressor?
I recently bought an air compressor to airate my sprinkler system. I have 1 acre of land. Do I use an air fitting with an 1/4 or 1/2 inlet. Also what size air line do I use. I might use it for my air impact tools. I was told not to use 1/2 inlet with my impact guns.
Answer:
Most air tools have a 1/4" inlet. This, along with 3/8" hose is sufficient for most applications including blowing out waterlines. Size of the tank will decide how much air you can put out over a certain period of time.
|
Powered by Yahoo! Answers
|
|